Recharge The Battery From A Wall Socket - NETGEAR MR1100 User Manual

Recharge the Battery From a Wall Socket


To recharge the battery from a wall socket:
1. Attach one end of the micro USB cable to the connector on the right on the mobile
router and attach the other end to the wall charger (included).
2. Plug the wall charger into a wall socket.
A lightning bolt appears on the Battery icon when the battery is charging.
The Battery icon on the LCD indicates when the battery is fully charged and a notification
displays.
Note: The battery continues to charge when the mobile router is powered
off.
If your battery does not charge, check the following:
• Is the mobile router hot? If you are in a low-coverage area, are transferring a lot of
data, or left the mobile router in a hot location, the internal temperature of the mobile
router can rise above 45°C. In these conditions, the battery cannot be charged due to
safety limits with lithium-ion battery technology.
• Make sure that the USB cable and the AC wall charger are connected securely and
are working correctly.
• If the wall socket is controlled by a switch, make sure that the switch is in the
power-on position.
Nighthawk M1 4GX Gigabit LTE Mobile Router
Manage Battery Usage and Charging
22