Operation (Electronic Bypass Only)
Drive Mode – Hand
Drive Mode – Hand
28
Siemens Industry, Inc.
4.
Use the Up and/or Down Arrow
highlight Activate, and then press OK
The unit is now operating in the Drive mode using I/O or Fieldbus control. The display
will return to the default display.
Hand mode is used when you want to override the automation system and run the
drive in keypad mode.
●
You have full control to start/stop the motor, and what the speed reference is from
the keypad directly.
●
In Hand mode, the Bypass (M1) contactor is opened and the Output (M2) contactor
is closed.
1.
At the drive keypad, press the Hand/Auto
2.
Use the Up and/or Down Arrow
highlight Drive, and then press OK
3.
Use the Up and/or Down Arrow
highlight Hand, and then press OK
BT300 Bypass Operator's Manual
buttons to
.
button.
buttons to
.
buttons to
.
DPD01391
2016-08-05