Aastra 9480i User Manual page 63

Configuring a Line Key
You can set a key as an additional line on the 9480i. The key acts as a line that behaves the same as a hard line key. For
more information about the behavior of line keys, see
You use the Aastra Web UI to set a key as a line.
Aastra Web UI
Use the following procedure to set a key to function as a line.
1. Click Operation->Softkeys and XML.
Softkeys
2. Select from "Key 1" through "Key 20".
3. In the "Type" field, select Line to apply to the softkey.
4. In the "Label" field, enter a label to apply to this softkey.
5. In the "Line" field, select a line to apply to this softkey.
Valid values are 5 through 9.
6. Check (enable) or uncheck (disable) the states you want to apply to this softkey.
7. Click Save Settings.
41-001382-00 REV01 – 06.2013
"Multiple Line and Call Appearances"
Line Keys and Softkeys
on page 49.
56