Using Intercom - Aastra 9480i User Manual

Making Calls

Using Intercom

On the 9480i, you can use the Icom hard key to automatically connect with a remote extension or answer an incoming
intercom call.
Using the Icom Key
IP Phone UI
1. Press the Icom key.
Enter the extension number of the person you wish to intercom or the BLF key for that extension.
2.
3. After a beep tone, your phone automatically connects with the remote extension and you can speak through its
speaker.
Goodbye
4. To cancel intercom, press
5. When you are finished speaking, hang up the phone by placing the handset back on-hook or by pressing
or the line/call appearance button for the active call. When you hang up, the remote phone also hangs up.
You can set specific incoming Intercom call features on the 9480i IP phone using the Aastra Web UI. The following table
describes these features.
Incoming Intercom Features in Aas-
tra Web UI
Microphone Mute
Auto Answer
Play Warning Tone
Allow Barge In
For more information about the incoming Intercom features and for procedures on setting these features, see
Intercom Call Features" on page
103
Hold Redial Goodbye
Options
1 2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7 8 9
PQRS TUV WXYZ
#
* 0
Xfer
Conf
L1
L2
or the Cancel key.
Description
Allows you to enable or disable the microphone on the IP phone for Intercom
calls made by the originating caller.
Allows you to enable or disable the IP phone to automatically answer an Intercom
call. If auto-answer is enabled on the IP phone, the phone plays a tone (if "Play
Warning Tone" is enabled) to alert the user before answering the intercom call. If
auto-answer is disabled, the phone treats the incoming intercom call as a normal
call.
Allows you to enable or disable a warning tone to play when the phone receives
an incoming intercom call on an active line.
Allows you to enable or disable how the phone handles incoming intercom calls
while the phone is on an active call.
163.
9480i
Intercom hard key
Icom
Services
L4
L3
Goodbye
"Incoming
41-001382-00 REV01 – 06.2013