Lexmark W820 User Manual page 305

37 Insufficient
Memory
What this message means:
The printer cannot process print jobs or restore held jobs from the hard disk because printer memory is
full.
What you can do:
•
•
•
See also:
Downloaded From ManualsPrinter.com Manuals
Note: The message 37 Insufficient Memory alternates with either
Held Jobs may be lost
If
Held Jobs may be lost
Press to clear the message and continue the current print job. The printer frees memory by
Go
deleting the oldest held job and continues deleting held jobs until there is enough printer
memory to process the job.
Press to clear the message without deleting any held jobs. The current job may not print
Stop
correctly.
Press to open the Job Menu and cancel the current job.
Menu
If
Held Jobs May Not Be Restored
the message.
To avoid this error in the future:
–
Delete fonts, macros, and other data in printer memory.
–
Install additional printer memory.
Using the Print and Hold
Restored
or
Held Jobs May Not Be Restored
is the alternating message, you can:
is the alternating message, you can press
function;
Held Jobs may be
303
.
Go
lost; Held Jobs May Not Be
to clear