Miscellaneous Mechanical Assemblies - Graco PR70 Series Operation And Maintenance Manual

Miscellaneous Assemblies

Miscellaneous Mechanical Assemblies

Figure 54: PR70 Power Entry Bracket Assembly (LC0106)
Key:
Ref P/N Description
1 119912 SCREW, PAN, M3X6, PHILLIPS, SS
2 121018 ELBOW, SWVL, 3/8 X ¼ NPT, FXM, 90DE
3 120876 PWR SUPPLY, 24VDC, 40W, 100-240VAC IN
4 120882 FILTER, 1/4NPT
5 120883 NUT, HEX, 7/8-14, MS
6 120910 PWR ENTRY, 120/240VAC, DUAL FUSE, EMI
7 120916 SCREW,FHSC, M3X0.5 X 10, SS
8 120993 NUT, HEX, M5X0.8, WITH STAR WASHER
9 15K798 BRACKET, SWITCH, AIR
10 15K800 FITTING, BULKHEAD
To Replace the Fuses:
1. Remove the machine fuse holder from the PWR
Entry module (6) by inserting a flat-head
screwdriver between the holder and the back the
PWR Entry module (The fuse holder is above
where AC power is connected to the machine).
312393C
QTY Ref P/N
3 11 84/0130-26/11
1 12 LC0034
1 13 121178
1 14 121179
1 15 121180
1 16 94/0762/99
2 17 94/0430/99
2 18 81/1054-4/11
1 19 LC0031
1
2. Replace the blown fuse(s) (18) into the fuse holder.
3. Re-install the holder into the PWR Entry Module.
Description
LABEL, PE
HARNESS, WIRE, REMOTE SIGNAL
VALVE, LOCKOUT, ¼ NPT
QUIKCLAMP, ¼ NPT
MULTIPORT, [3] ¼ NPT
VALVE, RELIEF, ¼ NPT, M, 110PSI, SIL
PLUG, SKT HD, ¼ NPT, MS
FUSE 5X20MM, 4AMP, FAST, TYPE F, 250VAC
CABLE ASSY, POWER IN
45 of 52
QTY
1
1
1
2
1
1
2
2
1