Table of Contents
Advertisement
✓ Configuration is where you can set up configuration and rules for
reconciling data. Under the Configuration link are two subsections,
Synchronization and Add-ins. These further help you organize the inter-
face. Most of the configuration options you want to set are accessible
through the Synchronization Configuration screen, which is shown in
Figure 15-5. The following section helps you do that.
Figure 15-5:
The
Synchro-
nization
Config-
uration
screen.
Configuring PIM synchronization
The important item in the Synchronization Configuration subsection, as
shown in Figure 15-5, is the Synchronization button. You use that button to
configure PIM synchronization.
Click the Synchronization button to display the screen shown in Figure 15-6.
You can see that the names correspond to BlackBerry Storm applications,
except for Contacts, which goes by the name Address Book. This screen is
the entry point for the entire synchronization configuration for PIM applica-
tions. Selecting an application on this screen allows you to pair the PIM hand-
held application with a desktop application (most likely Outlook).
From the PIM configuration screen, select which application data you want to
sync with your Storm. The following popular PIM applications can be synced
to your Storm: ACT!, ASCII Text File Converter, Lotus Notes, Lotus Organizer,
Microsoft Outlook, Microsoft Outlook Express, and Microsoft Schedule.
Chapter 15: Syncing the Synchronize Way
249
Advertisement
Table of Contents
