Toshiba ras-m16g3dv-e Service Manual page 42

Up to 4.5kw cooling capasity
Hide thumbs Also See for ras-m16g3dv-e:
Table of Contents

Advertisement

4. DRY OPERATION (COOLING ONLY)
For dehumidification, a moderate cooling performance is controlled automatically.
1. Press
: Select Dry .
MODE
2. Press
: Set the desired temperature.
5. Hi-POWER OPERATION
To automatically control room temperature and airflow for faster cooling or heating operation
(except in DRY mode).
Press
: Start and stop the operation.
Hi POWER
6. ECO OPERATION
To automatically control room to save energy (except in DRY mode)
Press
: Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically 1 degree/hour for 2 hours (maximum
2 degrees increase).
For heating operation the set temperature will decrease.
7. TEMPORARY OPERATION
In case of the misplaced or discharged remote control
Pressing the TEMPORARY button, the unit can
start or stop without using the remote control.
Operation mode is set on AUTOMATIC operation,
preset temperature is 24°C and fan operation is
automatic speed.
8. TIMER OPERATION
Setting the ON Timer
1
Press
2
Press
3
Press
Daily timer allows the user to set both the ON & OFF timers and will be activated on a daily basis.
Setting Daily Timer
1
Press
2
Press
During the daily timer is activation, both arrows ( or )are indicated.
Note:
Keep the remote control in accessible transmission to the indoor unit;
otherwise, the time lag of up to 15 minutes will occur.
The setting will be saved for the next same operation.
: Set the desired ON timer.
: Set the timer
: Cancel the timer
: Set the ON timer.
: Set the OFF timer.
Setting the OFF Timer
Press
: Set the desired OFF timer.
Press
: Set the timer.
Press
3
Press
.
4
Press
: button during the ( or ) mark flashing.
– 41 –
TEMPORARY
button

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents