Furuno MU-151C Operator's Manual page 14

Connecting FCV-1200L/1500L or CH-250/270
DATA/VIDEO IN port
• The cover of the D-sub connector of the cable 06S4078 may be removed to pass the
cable through tubing, bulkhead, etc. Use vinyl tape to bind connector wiring and rubber
cover. This allows the cable to be passed through a hole having a diameter of 30 mm.
• Cable 06S4078 is of waterproof construction, however, the rear panel of the MU-151C is
not waterproof (specification IP20). Therefore, remove rubber cover and fixing metal
from the display unit side of the cable.
Navigator, etc.
FCV-1200L/1200LM: CONTROL UNIT
FCV-1500L: CONTROL UNIT
MJ-A10SPF0002-015
CH-250, CH-270: CONTROL UNIT
FCV-1200L/1200LM: CONTROL UNIT
FCV-1500L: PROCESSOR UNIT
06S4078
CH-250, CH-270: TRANSCEIVER UNIT
Remove fixing metal.
CONT port
NMEA port
12-24 VDC (MJ-A3SPF0025-035, 3.5 m)
or 100-220 VAC (DPYCY-1.5)
Ground Terminal
DATA/VIDEO OUT
Remove rubber cover.
6
port
CONT
port
CONT
port
CONT
port
CONT
port
CN1
port