Stamina EX 30 Owner's Manual page 11

ASSEMBLY INSTRUCTIONS
L-L
STEP 15:
There is an "L-L" decal on the LEFT-LEFT BASE COVER(77), and an "R-L" decal on the
RIGHT-LEFT BASE COVER(78). Attach the LEFT-LEFT and RIGHT-LEFT BASE COVERS(77, 78) to the
LEFT UPRIGHT(3).
There is an "L-R" decal on the LEFT-RIGHT BASE COVER(79), and an "R-R" decal on the RIGHT-RIGHT
BASE COVER(80). Attach the LEFT-RIGHTand RIGHT-RIGHT BASE COVERS(79, 80) to the RIGHT
UPRIGHT(4).
To assemble the RIGHT BASE COVERS(79, 80), place the LEFT-RIGHT BASE COVER(79) at the inner
side of the RIGHT UPRIGHT(4). Place the RIGHT-RIGHT BASE COVER(80) at the outer side of the
RIGHT UPRIGHT(4) and bolt the covers together with the ROUND HEAD SCREWS(M4x20mm)(94). Then
bolt the LEFT-RIGHT BASE COVER(79) to the RIGHT UPRIGHT(4) with ROUND HEAD SCREW
(M5x0.8x20mm)(96). Repeat on the left side.
STEP 16:
Attach the RIGHT CHROMED PLATES(39) to the RIGHT SIDE HANDRAIL COVERS(38) with
the hooks on the chromed plates. Be careful not to damage the hooks when attaching the RIGHT CHROMED
PLATES(39). Repeat to attach the LEFT CHROMED PLATES(37) to the LEFT SIDE HANDRAIL COVERS
(36).
STEP 17:
Connect the ADAPTER(121) to the connector located on the back right end of the RIGHT
COVER(8). Plug the ADAPTER(121) into an electrical outlet.
R-L
11
L-R
R-R