Installation Instructions; Introduction; Preparing The M2488 And Its Optional Equipment - Fujitsu m2488 User Manual

M2488 USER'S GUIDE
2-1

INTRODUCTION

This chapter contains information on installing the M2488 tape drive and optional equipment. This
chapter is divided into the following major paragraphs:

2-2 PREPARING THE M2488 AND ITS OPTIONAL EQUIPMENT

2-3 CONFIGURATIONS
2-4 UNPACKING INSTRUCTIONS
2-5 EQUIPMENT INSPECTION
2-6 ASSEMBLY INSTRUCTIONS
2-7 PREPARATION FOR USE
2-2 PREPARING THE M2488 AND ITS OPTIONAL EQUIPMENT
Upon receipt of your equipment, follow the procedures in the order listed below:
STEP
1 Unpack the M2488 and attached medium changer (if
applicable).
2 Inspect the M2488 and medium changer (if applicable).
3 Assemble the M2488.
4 Configure the M2488.
5 Operating the M2488.
April 1997
CHAPTER 2

INSTALLATION INSTRUCTIONS

NOTICE
SERVICE
PERSONNEL
ONLY
PROCEDURE
CG00000-011403 REV. A
INSTALLATION INSTRUCTIONS
WHERE?
User's Guide, Chapter 2, paragraph 2-4
User's Guide, Chapter 2, paragraph 2-5
User's Guide, Chapter 2, paragraph 2-6
User's Guide, Chapter 4
User's Guide, Chapter 5
2-1