Table of Contents
Advertisement
M2488 USER'S GUIDE
4-4
DRIVE INFORMATION
Use the Inquiry menu to display or modify selected information about the M2488 configuration. An
explanation of this menu is given in Table 4-9.
Table 4-9. Operator Panel Top Level Menus - Information (Inquiry)
TEST and UNLOAD pressed
* →
OFFLINE
Navigation keys:
To navigate through the options, settings, and to make changes from the Operator Panel:
Press START to move forward through the options or settings. It will also increment the settings
numbers.
Press SHIFT and START to move backward through the options or settings. It will also decrement
the settings numbers.
Press RESET to move from settings to option or to leave setting mode.
Press TEST to move from the option to settings.
Press UNLOAD to select a number field for multiple digit numbers.
Setting Procedure:
Press and hold both the TEST and UNLOAD keys, wait for OFFLINE to be displayed then
Step 1.
release both keys.
main Off-line menu will be displayed. (Keys must be held for approximately 2 seconds
before Off-line mode is entered.)
April 1997
TEST and UNLOAD released
→
DIAGMODE
↓
START
SETTING
↓
START
LOADCODE
↓
START
INQUIRY
MODE PGS
FACTORY
a
Once the keys are released then the first item, DIAGMODE, in the
CG00000-011403 REV. A
Selection and execution of off-
line diagnostics
Access and configure user
settable options
Copy new firmware from a code
image tape cartridge into non-
volatile memory of M2488.
TEST
View M2488 Information
→
Display or change selected Tape
Unit or Medium-Changer Mode
Pages
Change factory mode settings,
enable factory mode, or enable
factory diagnostics.
CONFIGURATION
Product Guide
Section 8-4
User's Guide
Section 4-2
User's Guide
Section 4-3
User's Guide
Section 4-4
User's Guide
Section 4-5
Product Guide
Section 8-5
4-11
Advertisement
Table of Contents
