Royal LEXON S17 Owner's Manual page 3

• Do not pick up anything that is burning or smoking, such as cigarettes, matches,
or hot ashes.
• Do not use without Dust Bag and/or Filters in place.
• WARNING: This product contains chemicals known to the State of California to
cause cancer, birth defects or reproductive harm.
• An internal thermal protector has been designed into your cleaner to protect it from
overheating. When the thermal protector activates the cleaner will stop running. If
this happens proceed as follows:
1. Turn cleaner OFF and disconnect it from the electrical outlet.
2. Inspect the exhaust, inlet, hose, dirt container and secondary filters for any
obstructions. Clear obstructions if present.
3. When cleaner is unplugged and motor cools for 30 minutes, the thermal
protctor will deactivate and cleaning may continue.
If the thermal protector continues to activate after following the above steps, your
cleaner needs servicing.
CAUTION: TO REDUCE THE RISK OF DAMAGE:
• Avoid picking up hard, sharp objects with this product, as they may cause damage.
• Store in a dry place. Do not expose machine to freezing temperatures.
• Brushroll continues to turn while product is turned on and handle is in upright posi-
tion. Always turn the brushroll off by stepping on the power switch on the nozzle.
To avoid damage to carpet, rugs, furniture and flooring, avoid tipping cleaner or
setting it on furniture, fringed area rugs, or carpeted stairs.
• Do not use sharp objects to clean out hose as they can cause damage.
WARNING:
• To reduce the risk of electric shock, this appliance has a polarized plug (one blade
is wider than the other). This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrican to install the proper outlet. Do not change the plug in any way.
Your cleaner contains a Thermal Protector which will automatically shut off the motor at abnormally
high motor temperatures. If the Thermal Protector is activated - turn main switch off and unplug the
cleaner. Inspect the exhaust, inlet, hose, dirt container and secondary filter for any blockage. After
approximately 30 minutes the motor will have cooled and the vacuum will be ready to use. NOTE: The
cleaner must remain unplugged during the 30 minute cooling period.
3