Using The Remote Control - Yamaha RX-V1900 Owner's Manual

Input channel indicators
• Indicate the channel components of the current
digital input signal.
• Light up or flash according to the settings of the
speakers when this unit is in the automatic setup
procedure (page 29).
Presence speaker indicators
Light up according to setting for "PRESENCE SP"
(page 68) in "CONFIG" when this unit is in the auto
setup procedure (page 29) or the speaker level setting
procedure in the "LEVEL" (page 68).
q ZONE2/ZONE3 indicators
Lights up when Zone 2 or Zone 3 is turned on
(page 91).

Using the remote control

The remote control transmits a directional infrared ray.
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
Approximately 6 m (20 ft)
Display window (4)
[1] [2]
ID 1
MAIN
ZONE 2
ZONE 3
[3]
[1] ID1/ID2 indicator
Indicates the currently selected remote control ID
(page 93).
[2] Transmit indicator
Appears while the remote control is sending infrared
signals.
[3] Zone indicators
Indicates the currently controlling zone (page 91).
[4] Information display
Shows the name of the selected input source that you
can control.
Infrared window (1)
Outputs infrared control signals. Aim this window at the
component you want to operate.
Connections
Remote control sensor
30 30
ID 2
[4]
27
En