Using Examples - Yamaha RX-V1900 Owner's Manual

Saving and recalling the system settings (SYSTEM MEMORY)

Using examples

■ Example 1: Comparing the results of the
automatic setup and manual setup
This unit is equipped with three types of parametric
equalizer settings (page 71), and you can also make your
customized configuration of the sound settings of this unit
by using the "MANUAL SETUP" parameters (see
page 66). To compare the results of the automatic setup or
your manual configuration, use the 6SYSTEM
MEMORY buttons.
SYSTEM MEMORY 1
Results of the automatic setup
(PEQ SELECT: NATURAL)
SYSTEM MEMORY 2
Results of the automatic setup
(PEQ SELECT: FRONT)
SYSTEM MEMORY
1 2
SYSTEM MEMORY 3
Settings configured manually
Saving each setting
1
Perform the automatic setup (page 29).
Press and hold 6 SYSTEM MEMORY 1 for
2
4 seconds.
This unit stores the results of the automatic setup
(PEQ SELECT: NATURAL) to "MEMORY1".
3
Set "PEQ SELECT" to "FRONT" (page 71).
Press and hold 6 SYSTEM MEMORY 2 for
4
4 seconds.
This unit stores the results of the automatic setup
(PEQ SELECT: FRONT) to "MEMORY2".
5
Configure the parameters of "SPEAKER
MENU" (page 67) and "GEQ EDIT" (page 70)
manually.
Press and hold 6 SYSTEM MEMORY 3 for
6
4 seconds.
This unit stores the settings configured manually to
"MEMORY3".
80
En
3 4
■ Example 2: Switching the settings for
different room environments
The tonal characteristics of the listening room may vary
depending on the situations of the room (for example,
whether the curtains are open or closed), and the settings
of this unit should be arranged for each situation of the
room. You can switch between the settings of this unit
easily by using 6SYSTEM MEMORY buttons.
SYSTEM MEMORY 1
The settings when the curtains of the
listening room are closed
SYSTEM MEMORY
1 2
SYSTEM MEMORY 2
The settings when the curtains of
the listening room are open
Saving each setting
1
Close the curtains of the listening room and
then perform the automatic setup (page 29).
Press and hold 6 SYSTEM MEMORY 1 for
2
4 seconds.
This unit stores the settings for the current room
situation (i.e. the curtains are closed) to
"MEMORY1".
3
Open the curtains of the listening room and
the perform the automatic setup.
Press and hold 6 SYSTEM MEMORY 2 for
4
4 seconds.
This unit stores the current room situation (i.e. the
curtains are open) to "MEMORY2".
3 4