Panasonic KX-NS500 Pc Programming Manual page 564

11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification
Feature Guide References
2.19.1 Caller ID
Added Number
Specifies the number to be added to the incoming caller's number in the place of the removed digits.
Value Range
Max. 4 digits (consisting of 0–9, *, and #)
Maintenance Console Location
11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification
PC Programming Manual References
11.1.1 PBX Configuration—[3-1-1] Group—Trunk Group—TRG Settings—
14.1 PBX Configuration—[6-1] Feature—System Speed Dial
Feature Guide References
2.19.1 Caller ID
Length of Digits
The PBX adds a certain number of digits to the caller's number depending on the length of digits, as
programmed in the Length of Digits Modification Tables assigned to the trunk group. This modification is applied
to incoming trunk calls routed through public networks when the type of network numbering plan is Unknown
or not specified.
A maximum of 4 Length of Digits Modification Tables can be programmed. Select the desired table from the
Modification Table list.
If the length of digits of an incoming trunk call is less than the
caller's number is not modified.
Minimum Caller ID Digits (for International)
Specifies the minimum number of digits required in the caller's number for it to be recognised as an international
call. The value specified here must be larger than
Value Range
1–31
Maintenance Console Location
11.1.3 PBX Configuration—[3-1-3] Group—Trunk Group—Caller ID Modification
Feature Guide References
2.19.1 Caller ID
564 PC Programming Manual
Minimum Caller ID Digits (for National), the
Minimum Caller ID Digits (for National).
Caller ID Modification Table