Panasonic KX-NS500 Pc Programming Manual page 409

Value Range
None, 80 x n (n=2–75) ms
Maintenance Console Location
9.31 PBX Configuration—[1-1] Configuration—Slot—Port Property—E1 Port
Feature Guide References
2.11.9 Calling Party Control (CPC) Signal Detection
DTMF Width
Selects the length of the DTMF tone sent to the E1 channel.
Value Range
80 ms, 160 ms
Maintenance Console Location
9.31 PBX Configuration—[1-1] Configuration—Slot—Port Property—E1 Port
Ringback Tone to Outside Caller
Enables the PBX to send a ringback tone to an outside caller when the network cannot send the tone.
Value Range
Disable, Enable
Maintenance Console Location
9.31 PBX Configuration—[1-1] Configuration—Slot—Port Property—E1 Port
Dial Tone to Extension
Enables the PBX to send a dial tone to an extension making a call when the network cannot send the tone.
Value Range
Disable, Enable
Maintenance Console Location
9.31 PBX Configuration—[1-1] Configuration—Slot—Port Property—E1 Port
Answer Wait Timer (*60s)
Selects the length of time that the PBX waits for the called outside party to answer an outgoing trunk call. The
line will be disconnected automatically when this timer expires.
Value Range
None, 1–4
9.31 PBX Configuration—[1-1] Configuration—Slot—Port Property—E1 Port
PC Programming Manual 409