27.2.1 Network Service—[2-1] Server Feature—DHCP
27.2 Network Service—[2] Server Feature
27.2.1 Network Service—[2-1] Server Feature—DHCP
Settings for the DHCP Server can be programmed.
DHCP Server
DHCP Server
Specifies if the DHCP server functions of the PBX are enabled or not.
Value Range
Disable, Enable
Maintenance Console Location
27.2.1 Network Service—[2-1] Server Feature—DHCP
Port number
Specifies the port number used for the DHCP server.
Value Range
67, 1024–65535
Maintenance Console Location
27.2.1 Network Service—[2-1] Server Feature—DHCP
IP address auto assignment
Starting IP address
Specifies the starting IP address for the assignable range of IP addresses.
Value Range
1.0.0.0–223.255.255.255
Maintenance Console Location
27.2.1 Network Service—[2-1] Server Feature—DHCP
Ending IP address
Specifies the ending IP address for the assignable range of IP addresses.
Value Range
1.0.0.0–223.255.255.255
984
PC Programming Manual