Panasonic KX-NS500 Pc Programming Manual page 538

10.9 PBX Configuration—[2-9] System—System Options
PT Feature Access—No. 1–8
Specifies the System Feature Access Menu (1–8) shown on the display of an extension.
Value Range
None, Call Back Cancel, Call Pickup Direct, Call Pickup Group, DOORPHONE Call, Door Open, Relay On,
External BGM, Paging
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
ISDN Option—Fwd from ISDN to ISDN
Specifies whether alert messages are sent to the ISDN network. This setting should be enabled for networks
that disconnect a call if an alert message is not received.
Value Range
Mode1: Disable
Mode2: Enable
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
ISDN Option—Calling Party Name Sending Format
Specifies the sending format of the calling party name when making a call to the ISDN network.
Value Range
Display, Facility
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Option 6 (CTI)
Built-in Communication Assistant—System status retry interval timer
Specifies the length of time until the alive check is retried when no response is received, for First Party Call
Control CTI such as Communication Assistant (CA).
Value Range
0–60 s
Maintenance Console Location
10.9 PBX Configuration—[2-9] System—System Options
Feature Guide References
2.26.1 Computer Telephony Integration (CTI)
538 PC Programming Manual