Feature Guide References
5.1.3 Tenant Service
5.1.4 Time Service
2. Break—Break 1–3 Start—Setting
Enables the setting of the start time for each break period.
Value Range
Disable, Enable
Maintenance Console Location
10.4.1 PBX Configuration—[2-4] System—Week Table—Time Setting
Feature Guide References
5.1.3 Tenant Service
5.1.4 Time Service
2. Break—Break 1–3 Start—Hour, Minute
Specifies the start time for each break period. Times can only be set when
Start—Setting is set to Enable.
Value Range
00:00–23:59
Maintenance Console Location
10.4.1 PBX Configuration—[2-4] System—Week Table—Time Setting
Feature Guide References
5.1.3 Tenant Service
5.1.4 Time Service
2. Break—Break 1–3 End—Hour, Minute
Specifies the end time for each break period. Times can only be set when
Start—Setting is set to Enable.
Value Range
00:00–23:59
Maintenance Console Location
10.4.1 PBX Configuration—[2-4] System—Week Table—Time Setting
Feature Guide References
5.1.3 Tenant Service
10.4.1 PBX Configuration—[2-4] System—Week Table—Time Setting
2. Break—Break 1–3
2. Break—Break 1–3
PC Programming Manual
455