Setting Setpoint Specifications - Siemens SINAMICS G120 Manual

3.4 Application cases
Before returning control authority from the STARTER software to the terminal, you should try
controlling the motor from the PC.

Setting setpoint specifications

Input 1,500 1/min in the "Setpoint specifications" box.
1
2 Start the motor: the motor runs at 1,500 1/min.
3 Adjust the frequency with the slider.
4 Conclude the process by pressing the "Give up control priority" button.
All functions from the displayed control area in the STARTER will be deactivated.
The control authority has been returned to the terminal.
4
STARTER software and PC:
60
2
1
Application cases
3