FUEL DELIVERY, RETURN AND EVAPORATION LINES
Fuel Injection (Fuel Systems)
9) Separate quick connector on fuel delivery and
return line.
(1) Clean pipe and connector, if they are cov-
ered with dust.
(2) Hold connector (A) and push retainer (B)
down.
(3) Pull out connector (A) from retainer (B).
CAUTION:
Replace retainers with new ones.
(A)
Connector
(B)
Retainer
(C)
Pipe
B: INSTALLATION
1) Connect quick connector on fuel delivery line.
CAUTION:
¼ Always use a new retainer.
¼ Make sure that the connected portion is not
damaged or has dust. If necessary, clean seal
surface of pipe.
(1) Set new retainer (B) to connector (A).
(2) Push pipe into connector completely.
NOTE:
At this time, two clicking sounds are heard.
S2M0228A
S185019A11
S2M0229A
FU(DOHC TURBO)-68
(A)
Connector
(B)
Retainer
(C)
Pipe
CAUTION:
¼ Pull the connector to ensure it is connected
securely.
¼ Ensure the two retainer pawls are engaged in
their mating positions in the connector.
¼ Be sure to inspect hoses and their connec-
tions for any leakage of fuel.
(A)
Connector
(B)
Retainer
(C)
Pipe
S2M0230A
S2M0231A