16) Connect connector to tumble generator valve
sensor.
17) Connect connector to tumble generator valve
actuator.
18) Connect connector to fuel injector.
INTAKE MANIFOLD
19) Install throttle body to intake manifold.
NOTE:
Replace gasket with a new one.
Tightening torque:
EN0800
20) Connect connector to throttle position sensor
(A), idle air control solenoid valve (B) and pressure
sensor (C).
21) Secure engine harness to the intake manifold
with clip (D).
EN0799
22) Install engine ground terminal to intake mani-
fold.
Tightening torque:
EN0798
FU(DOHC TURBO)-27
Fuel Injection (Fuel Systems)
22 N·m (2.2 kgf-m, 16 ft-lb)
19 N·m (1.94 kgf-m, 14.0 ft-lb)
EN0785
S2M2249A
EN0795