Subaru forester 2001 Service Manual page 44

B: INSTALLATION
1) Before installing front oxygen (A/F) sensor,
apply anti-seize compound only to threaded por-
tion of front oxygen (A/F) sensor to make the next
removal easier.
Anti-seize compound:
SS-30 by JET LUBE
CAUTION:
Never apply anti-seize compound to protector
of front oxygen (A/F) sensor.
2) Install front oxygen (A/F) sensor.
Tightening torque:
30N·m (3.1 kgf-m, 22 ft-lb)
3) Install service hole cover.
4) Lower the vehicle.
5) Install front right side wheel.
6) Secure a harness to bracket (B) by clip (A).
FRONT OXYGEN (A/F) SENSOR
S185642A11
EN0833
EN0832
S2M2253A
FU(DOHC TURBO)-43
7) Connect connector of front oxygen (A/F) sen-
sor.
8) Connect battery ground cable.
Fuel Injection (Fuel Systems)
S2M2252
G6M0095