Subaru forester 2001 Service Manual page 25

Fuel Injection (Fuel Systems)
23) Remove tumble generator valve assembly
from intake manifold.
D: ASSEMBLY
S185034A02
NOTE:
Replace gasket with a new one.
1) Install tumble generator valve assembly to
intake manifold.
Tightening torque:
8.25 N·m (0.84 kgf-m, 6.08 ft-lb)
2) Install air intake duct to intake manifold.
Tightening torque:
19 N·m (1.94 kgf-m, 14.0 ft-lb)
INTAKE MANIFOLD
3) Install fuel pipe assembly and pressure
regulator, to intake manifold.
Tightening torque:
EN0815
4) Install fuel injector pipe LH.
5) Connect left side fuel hose to injector pipe, and
tighten clamp screw.
6) Install engine harness to intake manifold.
7) Install harness bracket which hold engine har-
ness onto intake manifold.
EN0815
Tightening torque:
EN0814
FU(DOHC TURBO)-24
5 N·m (0.51 kgf-m, 3.69 ft-lb)
19 N·m (1.94 kgf-m, 14.0 ft-lb)
EN0813
EN0812
EN0811