Subaru forester 2001 Service Manual page 21

Fuel Injection (Fuel Systems)
(3) Install power steering pump, and tighten
bolts.
Tightening torque:
20.1 N·m (2.05 kgf-m, 14.8 ft-lb)
(4) Install power steering pipe brackets on right
side intake manifold.
(5) Install front side V-belt. <Ref. to ME(DOHC
TURBO)-44, INSTALLATION, V-belt.>
14) Install coolant filler tank. <Ref. to CO-37,
INSTALLATION, Coolant Filler Tank.>
15) Connect accelerator cable.
16) Install intercooler.
TURBO)-10, INSTALLATION, Intercooler.>
17) Install air cleaner element.
18) Install air cleaner upper cover and air intake
duct as a unit. <Ref. to IN(DOHC TURBO)-7,
INSTALLATION, Air Cleaner.>
INTAKE MANIFOLD
H2M1954
S2M2248
H2M1890
<Ref. to IN(DOHC
FU(DOHC TURBO)-20
19) Connect connector to fuel pump relay.
20) Connect battery ground cable.
21) Lift up vehicle.
22) Install under cover.
23) Fill coolant. <Ref. to CO-14, FILLING OF
ENGINE COOLANT, REPLACEMENT, Engine
Coolant.>
S2M0093