Subaru forester 2001 Service Manual page 55

Fuel Injection (Fuel Systems)
12) Support fuel tank with transmission jack,
remove bolts from bands and dismount fuel tank
from the vehicle.
WARNING:
A helper is required to perform this work.
B: INSTALLATION
1) Support fuel tank with transmission jack and
push fuel tank harness into access hole with grom-
met.
2) Set fuel tank and temporarily tighten bolts of
fuel tank bands.
WARNING:
A helper is required to perform this work.
3) Connect two-way valve hose (A) to two-way
valve and connect canister hose (B) to canister.
FUEL TANK
S2M2246
S185053A11
S2M2246
EN0840
FU(DOHC TURBO)-54
4) Connect fuel filler hose (A) and air vent hose
(B).
5) Connect fuel hoses, and hold then with clips
and quick connector. <Ref. to FU(DOHC TURBO)-
68, INSTALLATION, Fuel Delivery, Return and
Evaporation Lines.>
6) Tighten band mounting bolts.
Tightening torque:
33 N·m (3.4 kgf-m, 25 ft-lb)
7) Install rear crossmember. <Ref. to RS-20,
INSTALLATION, Rear Crossmember.>
EN0539
EN0540
S2M2246