Subaru forester 2001 Service Manual page 59

Fuel Injection (Fuel Systems)
6) Insert fuel filler hose (A) approximately 35 to 40
mm (1.38 to 1.57 in) over the lower end of fuel filler
pipe and tighten clamp.
CAUTION:
Do not allow clips to touch air vent hose (B)
and rear suspension crossmember.
7) Insert air vent hose approximately 25 to 30 mm
(0.98 to 1.18 in) into the lower end of air vent pipe
and hold clip.
L = 27.5±2.5 mm (1.083±0.098 in)
(1) Hose
(2) Clip
(3) Pipe
8) Tighten bolt which holds fuel filler pipe bracket
on body.
Tightening torque:
7.5 N·m (0.75 kgf-m, 5.4 ft-lb)
FUEL FILLER PIPE
9) Tighten bolts which hold evaporation hoses
onto clip of fuel filler pipe.
10) Install fuel filler pipe protector.
EN0548
11) Install rear right wheel.
B2M1195A
12) Lower the vehicle.
13) Tighten wheel nuts.
14) Connect connector to fuel pump relay.
B2M1895
FU(DOHC TURBO)-58
EN0545
B2M1894
B2M1748
S2M0093