17) Disconnect connectors from engine coolant
temperature sensor (A), oil pressure switch (B) and
crankshaft position sensor (C).
18) Disconnect knock sensor connector.
19) Disconnect connector from camshaft position
sensor.
20) Disconnect connector from ignition coil.
INTAKE MANIFOLD
21) Remove harness secured by clip (A) from the
bracket.
EN0790
22) Disconnect fuel delivery hose, return hose and
evaporation hose.
WARNING:
Catch fuel from hoses in a container.
S2M1613
23) Remove bolts which secure intake manifold to
cylinder heads.
B2M1251
24) Remove intake manifold.
B: INSTALLATION
1) Install intake manifold onto cylinder heads.
NOTE:
Always use new gaskets.
EN0854
FU(DOHC TURBO)-17
Fuel Injection (Fuel Systems)
S2M2256A
EN0214
EN0792
S185034A11