Subaru forester 2001 Service Manual page 22

C: DISASSEMBLY
1) Remove fuel pipe protector.
2) Remove engine ground terminal from intake
manifold.
3) Disconnect connector from throttle position
sensor (A), idle air control solenoid valve (B) and
pressure sensor (C).
4) Separate engine harness secured to the intake
manifold by clip (D).
INTAKE MANIFOLD
S185034A06
EN0794
EN0795
EN0796
S2M2249A
FU(DOHC TURBO)-21
5) Remove throttle body from intake manifold.
6) Disconnect connector from fuel injector.
7) Disconnect connector from tumble generator
valve actuator.
8) Disconnect connector from tumble generator
valve sensor.
Fuel Injection (Fuel Systems)
EN0785
EN0798
EN0799
EN0800