ABLE OF ONTENTS 1. Before You Begin ............................3 What is included .............................. 3 Unpacking Instructions ............................ 3 AC Power ................................ 3 Safety Instructions ............................4 2. Introduction ............................... 5 Features ................................5 DMX Channel Summary ..........................5 Product Overview ............................6 Product Dimensions ............................
1. B EFORE EGIN What is included 1 x DIAMONDstrip™ Mini 2 x Tall Mounting Brackets 2 x Short Mounting Brackets 1 x Power Cord 1 x Warranty Card 1 x User Manual Unpacking Instructions Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition.
There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact CHAUVET at: 954-929-1115. DIAMONDstrip™ Mini User Manual 1/26/2010 2:58 PM...
2. I NTRODUCTION Features 4-channel DMX-512 LED linear wash light Blackout/static/dimmer/strobe Built-in automated programs via master/slave or DMX Built-in sound active programs via master/slave or DMX ADDITIONAL FEATURES Additional power output: max 32 units @ 120V Additional slave output allows for runway effect (up to 31 units) OPTIONS COLORstrip™...
Product Overview LEDs Control Panel (rear) See view below Mounting Brackets Foot controller Input (Optional Accessory LED- FS1) Power Output Master/Slave Output IEC Power Connector with DMX Out Fuse Holder Control Panel Microphone Sound Sensitivity Adjustment DMX In DIAMONDstrip™ Mini User Manual 1/26/2010 2:58 PM...
Maximum recommended number of fixtures on a serial data link: 32 fixtures Data Cabling To link fixtures together you must obtain data cables. You can purchase CHAUVET-certified DMX cables directly from a dealer/distributor or construct your own cable. If you choose to create your own cable please use data-grade cables that can carry a high quality signal and are less prone to electromagnetic interference.
Note! If you use a controller with a 5 pin DMX output connector, you will need to use a 5 pin to 3 pin adapter. CHAUVET Model No: DMX5M, or DMX5F. The chart below details a proper cable conversion: IN TO...
Master/Slave Fixture Linking 1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the first fixture. 2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the input connector of the next fixture consisting of a (male) 3 pin connector.
4. O PERATING NSTRUCTIONS The DIAMONDstrip™ Mini is a DMX-512 controllable, dimming white LED strip light fixture made up of highly efficient and super bright LEDs. The DIAMONDstrip™ Mini can operate in Stand-Alone, Master/Slave and via DMX-512 control, utilizing 4 channels of control. Using the control panel MODE DOWN...
Master/Slave & Stand Alone The Master/Slave mode will allow you to link units in a daisy chain fashion. In this mode, the first unit in the daisy chain will command all other units following. Stand Alone can simply be achieved by setting all units to Master.
DMX Control Mode Operating in a DMX Control mode environment gives the user the greatest flexibility, when it comes to customizing or creating a show. In this mode, you will be able to control each individual trait of the fixture and each fixture independently. Daisy Chain Connection Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the first fixture.
DMX Channel Values NOTE! Please read all instructions carefully on fixture DMX control mode and addressing. DMX channels 2, 3 and 4 functions are determined by the current settings of channel 1. For example, while Channel 1 is set between 210 and 219 the following conditions will apply; ...
No light output Check fuse Call service technician If you still have a problem after trying the above solutions, please contact CHAUVET Technical Support at the location below. Contact Us W o r l d W i d e...
XLR male to female connectors. The shield connection is pin 1, while pin 2 is Data Negative (S-) and pin 3 is Data positive (S+). CHAUVET carries 3-pin XLR DMX compliant cables, DMX-10 (33’), DMX-4.5 (15’) and DMX-1.5 (5’) DIAMONDstrip™...
Package must be clearly labeled with a Return Merchandise Authorization Number (RMA #). Products returned without an RMA # will be refused. Call CHAUVET and request RMA # prior to shipping the fixture. Be prepared to provide the model number, serial number and a brief description of the cause for the return.