IBM 8364 E series User Manual page 97

Error code Error message
NSB71605 DHCP offer from server
%s not valid.
NSB72505 BOOTP options exceed
the maximum allowable
BOOTP option length.
Network communication messages (NSB8xxxx)
NSB80509 Destination
unreachable, return
code x%d.
NSB80519 Failed ICMP mask
request.
NSB80529 Failed ICMP router
solicitation.
NSB80539 Domain Name Server
(DNS) error, return code
%d.
NSB80549 Cannot fragment data
packet, data not sent.
NSB80550 Transfer terminated by
user.
NSB81509 Time-out waiting for
TFTP reply.
NSB81519 TFTP error - %d %s.
NSB83509 Unable to load file via
boot file server protocol.
NSB83519 Cannot access boot file
from any server.
NSB83529 Cannot contact boot file
server x%s.
Chapter 11. Identifying problems with hardware that is configured for NS Boot
What you should do
Verify that the DHCP server settings are
correct.
BOOTP messages (NSB72xxx)
Verify that the BOOTP server settings
are correct.
Verify that there are no problems with
the network, and restart the Network
Station.
Verify that there are no problems with
the network, and restart the Network
Station.
Verify that there are no problems with
the network, and restart the Network
Station.
Verify that there are no problems with
the network, and restart the Network
Station.
Verify that there are no problems with
the network, and restart the Network
Station.
Restart the Network Station.
TFTP messages (NSB81xxx)
Restart the Network Station. If this does
not solve the problem, verify that you
connected the network cable to the
Network Station.
Boot file server messages (NSB83xxx)
Ensure that the boot protocol agrees
with your server settings in the NS Boot
utility.
Verify your configuration settings in the
NS Boot utility, and confirm the server
configuration.
Verify that the boot server settings are
configured correctly.
85