Primary Setup Utility Screens - IBM 8364 E series User Manual

Note: Pressing F1 during the system's keyboard test causes a false 301
3. Type the administrator password.
Note: If you want to enter the setup utility and do not know the
After the system has validated the administrator password, the main setup
utility screen will appear (see Figure 4 below). You can make changes to the
Network Station's system defaults at this time.
Figure 4. Configuration/setup utility screen
To see the primary setup utility screens, and some basic configuration
procedures, refer to "Primary setup utility screens".

Primary setup utility screens

Note: Setup screen references may be different depending on the Network
52
IBM Network Station
Keyboard Error to display, and a prompt for the administrator
password to appear.
password, perform the procedure, "Clearing the administrator
password and CMOS, creating a recovery CompactFlash card, and
reading a CompactFlash card" on page 24.
Station hardware, and date of manufacture.