IBM 8364 E series User Manual page 96

Error code
NSB61960
NSB61970
NSB62500
NSB62510
NSB70500
Most errors associated with DHCP are server configuration errors, contact the system
NSB71509
NSB71515
NSB71525
NSB71535
NSB71545
NSB71555
84
IBM Network Station
Error message
Error - full duplex
protocol error.
Unknown Token Ring
error code.
Ethernet messages (NSB62xxx)
Line speed automatic
negotiation failed.
No network device
found.
Network priority messages (NSB7xxxx)
DHCP, BOOTP, and
Local (NVRAM)
network priority not
set.
DHCP messages (NSB71xxx)
administrator and report your error
DHCP option %d boot
server name %s failed
DNS.
Missing DHCP option
%d from server.
Missing DHCP client IP
address.
Missing DHCP client
directory and file name.
DHCP OFFER XID
different than DHCP
DISCOVER XID.
DHCP options exceed
the maximum allowable
DHCP option length.
What you should do
Manually set the ring speed in the Local
(NVRAM) settings of the NS Boot utility,
or in the IBM Network Station Manager
program.
Verify that there are no problems with
the network, and restart the Network
Station. If this does not resolve the
problem, replace the Network Station
logic unit, or PCI adapter card (see
"Chapter 2. Replacing Network Station
parts" on page 9).
Verify that you connected the network
cable to the Network Station correctly.
Replace the Network Station logic unit
(see "Chapter 2. Replacing Network
Station parts" on page 9).
Verify that at least one network priority
is enabled in the NS Boot utility.
Verify that the DHCP server settings are
correct.
Verify that the DHCP server settings are
correct.
Verify that the DHCP server settings are
correct.
Verify that the DHCP server settings are
correct.
Verify that the DHCP server settings are
correct.
Verify that the DHCP server settings are
correct.