Table of Contents
Advertisement
Error code
NSB61729
NSB61739
NSB61740
NSB61750
NSB61760
NSB61770
NSB61809
NSB61819
82
IBM Network Station
Error message
Full duplex heartbeat
received too early.
Beacon received before
open completed.
Insertion timer expired.
Loop back test failed.
Heartbeat failed.
Unexpected Token Ring
interrupt.
Token Ring error in full
duplex request phase.
Token Ring error in full
duplex loop back phase.
What you should do
Full duplex error. Contact the system
administrator regarding network
problems, or, switch to half duplex. If
this does not resolve the problem,
replace the Network Station logic unit it
(see "Chapter 2. Replacing Network
Station parts" on page 9).
Full duplex error. Contact the system
administrator regarding network
problems, or, switch to half duplex. If
this does not resolve the problem,
replace the Network Station logic unit it
(see "Chapter 2. Replacing Network
Station parts" on page 9).
Full duplex error. Contact the system
administrator regarding network
problems, or, switch to half duplex. If
this does not resolve the problem,
replace the Network Station logic unit it
(see "Chapter 2. Replacing Network
Station parts" on page 9).
Full duplex error. Contact the system
administrator regarding network
problems, or, switch to half duplex. If
this does not resolve the problem,
replace the Network Station logic unit it
(see "Chapter 2. Replacing Network
Station parts" on page 9).
Full duplex error. Contact the system
administrator regarding network
problems, or, switch to half duplex. If
this does not resolve the problem,
replace the Network Station logic unit it
(see "Chapter 2. Replacing Network
Station parts" on page 9).
Stray error. If the Network Station does
not automatically restart, restart the
Network Station.
Indicates stage of Token-ring adapter
insertion. Watch for any messages that
accompany this message.
Indicates stage of Token-ring adapter
insertion. Watch for any messages that
accompany this message.
Advertisement
Table of Contents
