IBM 8364 E series User Manual page 125

SCRN02
F2 = View Hardware Configuration
F3 = Set Network Parameters
F4 = Set Boot Parameters
Return=Reboot
2. Highlight NVRAM and enter the following configuration values in the
appropriate fields:
v The IBM Network Station Internet Protocol (IP) Address.
v The Boot Host IP address.
v The Gateway IP Address.
v The Subnet mask.
3. Press Enter to save your configuration.
4. Press F4 to select the Set Boot Parameters option.
5. Type bflash.2800 in the Boot File field.
6. Refer to the following table, and type the correct path for your server
platform in the Boot Directory field:
For this Type this path:
platform:
/QIBM/ProdData/NetworkStationV2/x86/proms/
AS/400
/NetworkStationV2/prodbase/x86/proms/
Windows NT
/usr/NetworkStationV2/prodbase/x86/proms/
RS/6000
7. If you configured your server for the Trivial File Transfer Protocol (TFTP)
protocol, select TFTP as your primary Boot file server protocol.
8. If you configured your server for the NFS protocol, select NFS as your
primary Boot file server protocol.
If you are using the NFS protocol, do not add a forward slash ( / ) at the
beginning of the option 67 path. For example, type
usr/NetworkStationV2/prodbase/x86/proms/ for an RS/6000 server.
9. Press Enter to save your configuration.
The Network Station returns to the Network Computer Setup Utility
menu.
10. Press Enter.
Network Computer
Setup Utility
Appendix A. Updating the NS Boot version H2033190 (03/31/99)
113