Setting Iso Correction In Auto - Pentax X70 Operating Manual

Setting ISO Correction in AUTO

Set the sensitivity range when the sensitivity is set to AUTO.
You can select from 50-100, 50-200, 50-400, 50-800, and 50-1600.
• When [Bright Area Adj.] is on, the sensitivity cannot be set to 50. The
minimum sensitivity is set to 100.
• When the
Shooting(H)) mode is selected as the drive mode, the sensitivity is
fixed at [AUTO].
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [ISO
Corction in AUTO].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select the sensitivity adjustment
range.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
(Continuous Shooting(M)) or
M M
(Continuous
H H
Rec. Mode 1/4
Image Tone Bright
Recorded Pixels
ISO50-100
Quality Level
ISO50-200
White Balance
ISO50-400
Sensitivity
ISO50-800
ISO Corction in AUTO ISO50-1600
MENU Cancel
3
OK OK
127