Using The Digital Wide Function (Digital Wide Mode) - Pentax X70 Operating Manual

5
Press the shutter release button fully.
Press the shutter release button once to automatically adjust the
exposure and take the three pictures at different exposures.
• When the Instant Review is set to on (p.135), the third picture taken is
shown in Instant Review after shooting (p.67).
• Auto Bracket is unavailable in C (Movie), 9 (Green), S (Fireworks),
F (Digital Panorama) and X (Digital Wide) modes.

Using the Digital Wide Function (Digital Wide Mode)

3
In X (Digital Wide) mode, you can stitch two captured images into a
single frame up to approx. 20mm coverage (35mm film equivalent).
1
In A mode, set the mode dial to H and press the four-
way controller (3).
The Capture Mode Palette appears.
102
+
Shutter release button
Four-way controller
4 button