Taking Pictures With Automatic Exposure Adjustment (Auto Bracket) - Pentax X70 Operating Manual

Taking Pictures with Automatic Exposure
Adjustment (Auto Bracket)
Press the shutter release button once to automatically adjust the
exposure and take three pictures in succession. After taking the pictures,
you can select the best one.
You can set the adjustment from ± 0.3EV to ± 2.0EV.
The shooting order is as follows: correct exposure → negative
compensation → positive compensation.
1
Press the four-way controller (2) in A mode.
2
Use the four-way controller (45)
to select a (Auto Bracket).
The camera is now ready to take pictures
with Auto Bracket.
3
Use the four-way controller (23) to select EV
compensation value and press the 4 button.
4
Press the shutter release button halfway.
The focus frame on the display turns green when the subject is in
focus.
Shutter release button
Four-way controller
4 button
L L M M H H
Drive Mode Drive Mode Drive Mode
Auto Bracket Auto Bracket Auto Bracket
m m
Cancel Cancel Cancel
MENU
3
0.3 0.3 0.3
OK OK OK
OK
101