Setting The Image Tone - Pentax X70 Operating Manual

Setting the Image Tone

Set the image tone of still pictures.
You can select from [Bright], [Natural], or [Monochrome].
The default setting is [Bright].
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23) to select [Image Tone].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select a finishing tone.
5
Press the 4 button.
The setting is saved.
6
Press the 3 button.
The camera returns to capture status.
When [Monochrome] is selected, [Tone Adjustment] appears on the [A
Rec. Mode] menu for setting the tone of monochrome images instead of
[Saturation].
Rec. Mode 1/4
Image Tone Bright
Recorded Pixels Natural
Quality Level
Monochrome
White Balance AWB
Sensitivity AUTO
ISO Corction in AUTO
ISO50-400
Cancel
MENU
3
OK
OK
119