Setting The Finishing Image Tone (Custom Image) - Pentax MX-1 Operating Manual

Histogram
Highlight Alert
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears
again.
2
Instant Review 1p.57
Setting the Finishing Image Tone (Custom
Image)
Select the desired picture style from the following modes and enjoy
taking pictures with a creative finishing tone.
Image Tone
Bright
Natural
Vibrant
Reversal Film
Monochrome
The setting is not allowed when the capture mode is B (Auto
Picture), ! (Scene), or 9 (Green).
1
Use the four-way controller (23) to select [Custom
Image] in the [A Rec. Mode 1] menu, and press the
four-way controller (5).
The screen for selecting custom images appears.
110
Shows the brightness distribution of an image (p.27).
Bright (overexposed) portions blink red (p.29).
Saturation, hue, and contrast will be rather high to create a bright
sharp image. (Default setting)
Creates a natural look that is close to the actual color.
Changes the color slightly to create an antique look.
Creates a picture with strong image contrast as if taken with a
reversal film.
Takes pictures using a B&W color filter.
Image