Setting The Image Tone - Pentax Optio WG-2GPS Operating Manual

Setting the Image Tone

For setting the tone of images.
You can select from [Bright], [Natural], or [Monochrome].
The default setting is [Bright].
1
Use the four-way controller (23) to select [Image Tone] on
the [A Rec. Mode] menu.
2
Press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select a finishing tone.
4
Press the 4 button.
The setting is saved.
When [Monochrome] is selected, [Tone Adjustment] appears on the [A Rec.
Mode] menu for setting the tone of monochrome images instead of
[Saturation].
3
95