Adjusting headlight beam
throw
If, for a high load, the adjust-
ment of the spring pre-load is
no longer sufficient not to dazzle
oncoming traffic:
Turn adjusting screw 1
counter-clockwise with open-
ended spanner 2 (on-board
toolkit) to lower the headlight
beam.
When the motorcycle is again
ridden with a lower load:
Have the basic settings of the
headlight restored by a special-
ist workshop, best of all by a
BMW Motorrad dealer.
Clutch lever
WARNING
Adjusting the clutch lever
while riding.
Risk of accident
Do not attempt to adjust the
clutch lever unless the motor-
cycle is at a standstill.
Turn adjusting screw 1
clockwise to increase the span
between the clutch lever and
the handlebar grip.
Turn adjusting screw 1
counter-clockwise to reduce
the span between the clutch
lever and the handlebar grip.
NOTICE
The adjusting screw is easier to
turn if you push the clutch lever
forward.
Brake lever
WARNING
Changed position of the
brake fluid reservoir.
Air in the brake system.
Do not turn the handlebars or
the handlebar fitting on the
handlebar.
5
55
z