Installing the front-wheel stand
9
(
91).
104
Slacken axle clamping
z
screws 1.
Remove screw 1.
Slacken axle clamping
screws 2.
Press quick-release axle slightly
toward the inside, so as to be
better able to grip it on the
right-hand side.
Withdraw quick-release axle 1,
support the front wheel when
doing this.
Set down front wheel and
roll forwards out of the front
suspension.
Remove spacer bush 1 from
the wheel hub.
Installing front wheel
WARNING
Use of a non-standard wheel.
Malfunctions in operation of ABS.
See the information on the
effect of wheel size on the
ABS system at the start of this
chapter.