Front-Wheel Stand - BMW F800R Rider's Manual

Front-wheel stand

Installing the front-wheel
stand
ATTENTION
Use of the BMW Motorrad
front wheel stand without
also accompanying use of
centre stand or auxiliary
stand.
Risk of damage to parts if vehicle
topples.
Place the motorcycle on its
centre stand or another auxili-
ary stand before lifting the front
wheel with the BMW Motorrad

front-wheel stand.

without centre stand
Make sure the ground is level
and firm and place the mo-
torcycle on a suitable auxili-
ary stand. BMW Motorrad re-
commends the BMW Motorrad
auxiliary stand.
with centre stand
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Use basic stand with front-
wheel adapter. The basic stand
and its accessory compon-
ents are available from your
BMW Motorrad authorised
OE
dealer.
Slacken securing screw 1.
Push the two adapters 2 apart
until the front forks fit between
them.
OE
Use locating pins 3 to set the
front-wheel stand to the de-
sired height.
Centre the front-wheel stand
relative to the front wheel and
push it against the front axle.
Align the two adapters 2 so
that the front forks are securely
seated.
Tighten securing screws 1.
9
91
z