Install securing screws 4 on
left and right and tighten to
specified tightening torque.
Brake caliper on tele-
scopic fork
38 Nm
Remove the adhesive tape
from the wheel rim.
WARNING
Brake pads not contacting
the brake disc.
Delayed braking effect.
Before riding off, always check
that the brakes bite as soon as
the brake lever is pulled or the
brake pedal depressed.
Operate the brake several
times until the brake pads are
bedded.
Seat the cable for the wheel-
speed sensor in retaining
clips 1 and 2.
Insert the wheel-speed sensor
into the bore and install
screw 3.
Wheel-speed sensor,
front, to fork leg
9 Nm
Remove the rear wheel
Press brake caliper 1 against
brake disc 2.
Brake pistons are pushed back.
Remove screw 1 and remove
the speed sensor from its bore.
9
107
z