Bluetooth Test Procedure - Philips Fisio 820 Service Manual

Cellular telephone
Hide thumbs Also See for Fisio 820:
Table of Contents

Advertisement

Départ. Technical support- CM640
PHILIPS Consumer
Communications
Centre du Mans
8.5

Bluetooth Test Procedure

In order to communicate with different wireless device you will be using, Bluetooth feature of your mobile phone
must be set in stand-by mode.
Press
and
select
Press
or
Bluetooth devices must first be paired to each other (e.g. the headset to your mobile phone) before being use.
Ensure that both the mobile phone and the headset are on and place then near each other (refer to the headset
documentation for information on pairing).
Press
on your mobile phone and
headset is set in pairing mode (refer to the headset documentation) an press
An animated icon appears on the screen, showing that your mobile is searching the headset. During pairing it is
recommended that the mobile phone and the device you are using it with are no more than 1m./ 3ft. Apart, with no
solid objects in between.
Pairing authentification should take place within 1 min.
Select in the list of detected devices the headset to be authentified and paired and press
Enter the pairing code supplied with your headset, then press
A pairing code (16 characters max.) , allows the mobile to identify and differentiate several devices from one
another. The default paring code is usually 0000.
Once the mobile has found the headset, it displays its name and address. Press
your headset is ready for use with your mobile phone.
To fulfill the test procedure make a call using the bluetooth headset.
Your mobile phone will NOT answer the Bluetooth connection requests of wireless devices if the stand-by
duration time is set to "Never".
To turn Bluetooth Off is recommended when not using it, as it increases energy consumption.
 PHILIPS ELECTRONICS N.V. 1999
All rights reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
PROCEDURE
Settings,
BT
Settings,
to change the duration time to
select
Service Repair Support
Bluetooth On/OFF
and press
15
min. Then press
Accessories,
BT
Headset, Detect. Ensure that the
.
COMPANY RESTRICTED
VY-V-640-82x
Page : 49 of 71
Langue : EN
Date : 25/02/03
.
to confirm.
on your mobile phone.
.
to store this information :
VY-V-640-82x

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fisio 825

Table of Contents