Départ. Technical support- CM640
PHILIPS Consumer
Communications
Centre du Mans
8.4.3
W@P Application launch
The phone is now ready to access to the W@P Gateway. Please launch the W@P application to ensure it works
properly.
8.4.4
Memory reliability
After recording the W@P parameters :
½
½
Turn off the mobile
½
Remove the battery
½
Wait 5 seconds
½
Clip the battery again
½
Turn on the mobile
Check that the parameters still present.
Error message during w@p connections are mainly due to incorrect parameters. The operator should be
contacted before first use, in order to have the appropriate w@p and Gprs parameters.
PHILIPS ELECTRONICS N.V. 1999
All rights reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
PROCEDURE
Service Repair Support
COMPANY RESTRICTED
VY-V-640-82x
Page : 46 of 71
Langue : EN
Date : 25/02/03
VY-V-640-82x