Départ. Technical support- CM640
PHILIPS Consumer
Communications
Centre du Mans
GSM Settings
GSM settings consist in many parameters :
Phone number parameter:
This parameter is the phone number required to perform a data transmission to the Internet Service
Provider (ISP) and given by the operator. ISP use either analogue or numeric interfaces to connect to the
subscriber. If the operator uses a digital interface but the phone number is set in the analogue area of the phone,
data connection will fail (and vice versa).
Login parameter:
This parameter is provided by the operator.
Password parameter:
This parameter is provided by the operator.
Gateway parameter (IP):
An IP address is used to recognize computers connected to a network. It is made up of 4 * 3 digits (8 bits) and
separated by points. Each computer has its own IP address. For W@P application, IP address is used to access the gateway.
This parameter is provided by the operator.
Inactivity time:
This parameters allows you to manage an inactivity time period after which the phone automatically ends
up the w@p session and returns to idle mode screen.
GPRS Settings
GPRS settings consist in many parameters :
APN Number:
This parameter sets the address of the external data network. You want to connect to, a text string or an IP
address used to establish the connection with your w@p service provider (ISP).
PHILIPS ELECTRONICS N.V. 1999
All rights reserved. Reproduction in whole
or in part is prohibited without the written
consent of the copyright owner.
PROCEDURE
Service Repair Support
COMPANY RESTRICTED
VY-V-640-82x
Page : 45 of 71
Langue : EN
Date : 25/02/03
VY-V-640-82x