Pentax OPTIO Optio 750Z Operating Manual page 80

Selecting the Viewing Mode
1
Press the 3 button.
The [
A
4
2
Use the four-way controller (23)
to select [3D Mode].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to select [Parallel] or [Cross].
You can view both [Parallel] and [Cross] pictures without the image
viewer.
To view pictures with the 3D image viewer (optional), select [Parallel].
5
Press the shutter release button halfway.
The 3D Mode setting is saved and the screen returns to capture status.
Refer to Step 6 of "How to Use the Menus" (p.43) for other operations
after the setting has been made.
How to Take and View 3D Pictures
As our eyes are positioned about 6 cm (2.4 in.) or 7 cm (2.8 in.) apart,
there is a very slight deviation between what we see with our right eye
and what we see with our left eye. The difference is processed by our
brain to produce a three-dimensional image. This principle is applied to
taking and viewing 3D pictures.
A three-dimensional effect will not be achieved if the subject moves
before the second image is taken. When taking a 3D picture of a person,
ask your subject to stay as still as possible, and then take the second
picture as quickly as you can. It is easier to take the picture if you use a
tripod or appropriate base.
78
1
Rec. Mode] menu appears.
5
2, 3, 4
Rec. Mode
Flash Exp. Comp. 0.0
Auto Bracket
Interval Shoot
Movie
3D Mode Parallel
Digital Zoom Cross
Cancel
MENU
OK
OK